首页 > 国外线缆
[问题求助] 哪位有UL21283 的标准资料？
P:2018-01-05 20:15:08
2
| APPLIANCE WIRING MATERIAL |  | ||||
| Subj.758 | Section 2 | Page 21283 | Issued:2003-09-05 |
| Revised:2011-09-07 | |||
| Style 21283 | Multiconductor Cable with Extruded non-integral jacket | |
| Rating | 80 deg C, 30 Vac, Horizontal flame. | |||||||||
| Conductor | 40 AWG min. solid or stranded round, tinned or bare copper. | |||||||||
| Insulation | Labeled or complying with manufacturer's AWM Procedure. | |||||||||
| Assembly | Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturers shall maintain a complete description of each assembly. May use same or mixed AWG size. | |||||||||
| Shield | Optional. Over one or more of the insulated conductors or between the conductor assembly and the optional covering. | |||||||||
| Covering | Optional. Extruded FRPE or extruded PVC covering over the conductor assembly, 5 mils minimum thickness at any point. | |||||||||
| Jacket | Extruded FRPE, 12 mils min average thickness, 10 mils minimum thickness at any point. | |||||||||
| Standard | Appliance Wiring Material UL 758. | |||||||||
| Marking | General. | |||||||||
| Use | Internal wiring of electrical equipment. | |||||||||
UL and the UL Logo are trademarks of UL LLC © 2018
dynamically-wound multi-wire strand - 动态绕制多股绞线 （0） 投诉
3
你需要登录才能发表，点击登录。