电线电缆网 > 国外线缆 > 请问这是什么线?BELDEN-M 8760 CM 1PR18 SHIELDED (完整版)
请问这是什么线?BELDEN-M 8760 CM 1PR18 SHIELDED - 无图版
阳光明媚 --- 2007-08-15 13:48:14
1
此电线上印字为
BELDEN-M 8760 CM 1PR18 SHIELDED (UL) E108998 OR AWM 2092 OR C(UL)CM 2112 0316 242 ROHS 1055314 FEET
请各位指教这是什么线?执行标准是什么?非常感谢!
xdjhxq --- 2007-08-16 09:55:09
2
这种是不是煤矿用橡套电缆 因老标准上名字UL 现为MY
songhaihua --- 2007-08-16 10:30:03
3
最好是对电线本身也进行一下描述,这样更好判断
cuijiude --- 2007-08-16 13:02:55
4
BELDEN-M 8760
belden公司的产品,编号 8760 ,标准就是AWM 2092 啊
M8760 is shielded. used for RCA,
[cuijiude 在 2007-8-16 13:14:41 编辑过]
阳光明媚 --- 2007-08-17 10:52:27
5
我描述一下此电线:护套灰色,护套厚度实际为0.9mm,一共三芯,两芯为带绝缘的线芯,颜色分别为黑色与白色,此两芯绕包了一层金属箔,一芯是无绝缘的镀锡铜导线7根,这一根与绕包后的那两绝缘线芯成缆后挤出护套。铜丝都是用的镀锡铜丝,从导体直径来看象是2*1.0+1*0.75 请朋友再重新确认一下是什么线,有人说可能是5号线,对5号线我不懂.请帮忙谢谢!
阳光明媚 --- 2007-08-17 11:04:30
6
|
cuijiude --- 2007-08-17 18:19:15
7
到书店买本字典,或者运用本论坛的在线翻译版块。http://dxdlw.com/Eing.asp
呵呵
阳光明媚 --- 2007-08-18 15:36:03
8
谢谢,知道了,我自己去查
辉熊 --- 2007-08-23 08:45:43
9
(UL) OR AWM 2092 OR C(UL)CM 2112 0316 242 ROHS 1055314 FEET
符合盟环保指令的UL/CUL标准的2092电线。
UL/CUL:美国标准; E108998:档案号; AWM :电器装置用线;ROHS:欧盟环保指令;
看UL758标准。
zqztrcf --- 2008-01-31 15:17:03
10
jollyzhong --- 2008-02-16 17:19:13
11
UNDERWRITERS LABORATORIES INC. APPLIANCE WIRING MATERIAL
Subject 758 Section 2 Page 2092 Issued:
Style 2092 Two-Conductor P.E. Insulated and PVC Jacketed Cable
______________________________________________________________________________
Rating
______________________________________________________________________________
Conductors Two 30-16 AWG solid or stranded, tinned or bare copper
page 26.
______________________________________________________________________________
Insulation 15 mils min avg., 13 mils min at any point Polyethylene or
Flame-Retardant Polyethylene
______________________________________________________________________________
Conductor Two individually insulated wires cabled together. The
Assembly length of lay of the twisted wires is not specified.
Fillers may be used in a cable but are not required. A
barrier layer, if employed, may be 10 mils of extruded PVC,
a fibrous wrap serving or braid, paper, nylon, oriented
polyethylene terephthalate, or a thermoplastic-tape wrap.
Such a barrier layer would serve to protect the cable during
further processing and would be applied immediately over the
twisted assembly of individual conductors or groups of
conductors.
______________________________________________________________________________
Shielding Over one or both conductors, Page 24.
(Optional)
______________________________________________________________________________
Jacket PVC: 15 mils min avg., 13 mils min at any point Class 11.
______________________________________________________________________________
Standard Flexible Cord and Fixture Wire
______________________________________________________________________________
Instructions Detailed examination
to UL Physical Properties: (unaged) Insulation:
Representative PE - Page 42, FRPE - Page 43 Jacket - Page 32
Spark Test, 3000 Volts, page 30.
______________________________________________________________________________
(Continued on page
UNDERWRITERS LABORATORIES INC. APPLIANCE WIRING MATERIAL
Subject 758 Section 2 Page
UL (4) Detailed examination.
Counter-Check (4) Physical Properties: Insulation: PE Page 42.
Program FRPE - Page 43, Jacket - Page 33.
(4) Flexibility, page 55.
(4) Cold Bend, page 58.
(4) Flame Test, page 31.
(4) Heat Shock, page 57.
(4) Deformation, Jacket page 38, Insulation page 38 except
at
______________________________________________________________________________
Marking General, page 13.
______________________________________________________________________________
Use Internal Wiring of Electronic Equipment. Tags may indicate
the following: "600 Volts peak for electronic use only."
ohwabob --- 2008-03-19 16:23:22
12
深奥
qwqzhw --- 2011-08-01 15:24:52
13