电线电缆网 > 通讯电缆 > 弹弓线谁家有生产(完整版)
弹弓线谁家有生产 - 无图版
初出茅庐 --- 2007-08-31 17:25:44
1
UL2464 VW-1 80℃ 300V 4C*24AWG(41/0.08 BA) 芯线:PP绝缘 (红、黑、黄、白) 弹弓线:卷线长度L=200 mm 卷线外径14~14.5mm. 两端直线长度L=140±5mm OD=3.5±0.1mm PU外被 黑色 外被要求柔软(80P)
以上规格的线才谁家有生产请留下联系方式谢谢
cuijiude --- 2007-08-31 18:23:31
2
UNDERWRITERS LABORATORIES INC. APPLIANCE WIRING MATERIAL
Subj. 758 Section 2 Page 2464 Issued:
Revised:
Style 2464 PVC Jacketed Cable.
______________________________________________________________________________
Rating
______________________________________________________________________________
Insulated Labeled or complying with manufacturer's AWM Procedure
Conductors having a minimum rating of
______________________________________________________________________________
Assembly Two or more singles, twisted pairs of groups of twisted
singles twisted together or singles or groups of singles
may be laid parallel to form flat, oval or round cable.
Lay not specified. Barrier layer and/or fillers optional.
Manufacturer shall maintain a complete description of each
assembly. May use same or mixed AWG size.
______________________________________________________________________________
*Covering (Optional.)
______________________________________________________________________________
Shield Optional.
______________________________________________________________________________
Jacket PVC - Class 43
THICKNESS OF PVC JACKET (mils)
#Dia. of Cable Minimum
Under Jacket Minimum at any
in Inches Average point
0.700 or less 30 24
0.701 - 1.000 45 36
1.001 - 1.500 60 48
1.501 - 2.500 80 64
2.501 - 4.000 110 88
4.001 or larger 140 112
# Major diameter if cable is flat or oval.
______________________________________________________________________________
Braid Optional.
______________________________________________________________________________
Standard Appliance Wiring Material UL 758.
______________________________________________________________________________
(Continued on Page
UNDERWRITERS LABORATORIES INC. APPLIANCE WIRING MATERIAL
Subj. 758 Section 2 Page
Revised:
Instructions Detailed Examination of the cable assembly and jacket.
to UL Physical Properties of Jacket.
Representative Dielectric Strength Test, 1500 Volts (shielded cable only).
The designation of all Styles of the individual conductors used making up the cable assembly shall be available, and the UL Representative’s tag shall indicate if the Style is labeled or not. If they are not labeled, the appropriate Follow-Up Tests shall be conducted.
______________________________________________________________________________
UL (4) Detailed Examination.
Counter-Check (4) Physical Properties of Jacket.
Program (4) Heat Shock on Jacket.
(4) Cold
(4) Deformation on Jacket, Class 43.
(12) Cable Flame Test on Completed Cable.
If the insulated styles are not labeled, the appropriate Follow-Up Tests shall be conducted.
______________________________________________________________________________
Marking General.
______________________________________________________________________________
Use Internal wiring or external interconnection of electronic
equipment (such as desk-type calculators, dictating
machines, or x-ray equipment).
cuijiude --- 2007-08-31 18:25:19
3
2464的护套是PVC的,用TPU不好吧。
弹弓线可以做,数量有多少
lupuming --- 2007-08-31 20:26:03
4
需要任证过才可以吗,我想做非标线呢,
BAIDMQ --- 2007-09-01 09:04:14
5
BAIDMQ --- 2007-09-01 09:05:54
6
jack123456 --- 2007-09-01 11:03:42
7
2464的絕緣是可以,你們公司申請過的所有80C 300V的電子線,不一定要PVC SPVC,PP PE只要有安規一樣可以做
外被一定要是PVC,
回5樓的問題
AWen --- 2007-09-01 13:14:31
8
长安 六如电线就做很多PU弹弓线
sqsfywl --- 2007-09-01 13:52:41
9
工序 | 项目 | 参数 | ||
束 丝 工 序 | 节径比 | 30 | ||
束丝外径(mm) | 0.61 | |||
节距(mm) | 18.27 | |||
绞入率 | 1.0026 | |||
直径(mm) | 0.08 | |||
根 数 | 41 | |||
密 度 | 8.96 | |||
单价(元/KG) | 100.00 | |||
重量(KG/KM) | 7.45 | |||
押出 绝缘 工序 | 押出外径(mm) | 1.10 | ||
厚 度(mm) | 0.25 | |||
密 度 | 0.93 | |||
单价(元/KG) | 12.00 | |||
重量(KG/KM) | 2.75 | |||
成 缆 | 节径比 | 30 | ||
成缆后外径(mm) | 2.66 | |||
节 距(mm) | 79.66 | |||
绞入率 | 1.0063 | |||
根 数 | 4 | |||
押出 (挤压式) 护套 工序 | 押出外径(mm) | 3.50 | ||
厚 度(mm) | 0.42 | |||
密 度 | 1.50 | |||
单价(元/KG) | 8.00 | |||
重量(KG/KM) | 8.34 | |||
销售 | 工艺损耗 | 1.03 | ||
材料占销售比例 | 0.80 | |||
单价(元/M) | 1.0878 |
他可能是要这样的线,非标。做成弹簧每米需加0.15-0.3元也就是1.3元/M。
[sqsfywl 在 2007-9-1 14:26:43 编辑过]
[sqsfywl 在 2007-9-1 14:34:06 编辑过]