电线电缆网 > 国外线缆 > 推荐UL STYLE(完整版)
推荐UL STYLE - 无图版
roger --- 2008-05-19 10:23:15
1
各位比较熟悉UL STYLE PAGE的兄弟帮忙推荐个规格,要求如下:
1. 60摄氏度 300V
2. 绝缘材料可以选择交联XLPE
3. 遮蔽和PVC JACKET可选
按以上要求可以选择哪个或哪些UL STYLE?谢谢!
jackeyli --- 2008-05-19 10:29:42
2
ok509 --- 2008-05-19 10:41:52
3
XLPE?
roger --- 2008-05-19 10:48:04
4
或者60摄氏度以上
Ericwang --- 2008-05-19 13:23:40
5
UNDERWRITERS LABORATORIES INC. APPLIANCE WIRING MATERIAL
Subj. 758 Section 1 Page 1150 Issued: 1959-05-01
Revised: 2003-03-31
*Style 1150 Polyethylene Insulated, Shielded and Thermoplastic (PVC)
Jacketed Wire for Electronic Use.
______________________________________________________________________________
Rating 60°C, 300 Volts.
______________________________________________________________________________
Conductor No. 26-16 AWG, solid or stranded, tinned or bare.
______________________________________________________________________________
*Insulation Polyethylene or Flame-Retardant Polyethylene, 30 mils
minimum average thickness, 27 mils minimum at
any point.
______________________________________________________________________________
Shielding Shielding over conductor insulation shall consist of
No. 38-30 AWG, tinned or untinned copper strands applied
as a wrap or a braid or a wrap of aluminum faced “Mylar”
tape with a parallel uninsulated drain wire or a
conductive PVC shield with a parallel uninsulated drain
wire.
______________________________________________________________________________
*Jacket PVC, Class 43, 15 mils minimum average thickness, 13 mils
minimum at any point.
______________________________________________________________________________
Standard Appliance Wiring Material UL 758.
______________________________________________________________________________
Instructions Detailed Examination.
to UL Tensile Strength and Elongation of Insulation,
Representative before aging for Polyethylene and
for Flame-Retardant Polyethylene.
Tensile Strength and Elongation of Jacket same as
for Class 43.
* Spark Test.
______________________________________________________________________________
UL (4) Detailed Examination.
Counter-Check (4) Insulation, for Polyethylene and
Program for Flame-Retardant Polyehtylene.
(4) Jacket, Physical Properties, Class 43.
(4) Flexibility.
(4) Cold Bend.
* (12) Horizontal Flame Test.
______________________________________________________________________________
(Continued on Page 1150A)
UNDERWRITERS LABORATORIES INC. APPLIANCE WIRING MATERIAL
Subj. 758 Section 1 Page 1150A Issued: 1959-05-01
Revised: 2003-03-31
Marking General.
______________________________________________________________________________
Use For electronic use in non-hazardous locations.
jackeyli --- 2008-05-19 15:03:00
6
李小龍 --- 2008-05-21 08:36:06
7
李小龍 --- 2008-05-21 08:37:15
8
sqx007421 --- 2008-05-26 10:13:38
9
roger --- 2008-05-28 10:39:06
10