电线电缆网 > 国外线缆 > UL电线表面印字是否有标准其一排字后之间间距是否有标准？（完整版）
UL电线表面印字是否有标准其一排字后之间间距是否有标准？ - 无图版
46802986 --- 2008-05-24 08:32:06
1
UL电线表面印字是否有标准其一排字后之间间距是否有标准？
xj168 --- 2010-01-21 22:34:25
2
有标准可查, 最大600MM
yangshan --- 2010-01-22 19:02:48
3
学习中
白欣 --- 2010-02-21 16:11:26
4
我怎么没看见过对印字间隔的要求条款呢？谁要是找到了，交流一下。
tcable.com --- 2010-02-26 15:13:55
5
在哪里标准，等否具体下？xj168:
有标准可查, 最大600MM
alan79114 --- 2010-03-04 15:57:25
6
完整的印字内容要在1米内体现，其它并没有规定。此要求可以在跟踪服务细则的Sec.Gen部分查到，例如：
For products meeting only Canadian requirements, surface printing is required for finished products having an overall diameter of 1.3 mm and larger. A finished product shall have a distinctive marking throughout its entire length by which it may be readily recognized as the product of a particular factory. The marking shall consist of surface printing, indent‑marking, embossing, colored threads, or printed tape. If the marking is not continuous, it shall appear at intervals of not more than 1 m. A finished product of Appliance Wiring Material shall also be legibly and durably identified with the following marked at intervals not more than 1 m:bluecui --- 2010-03-06 10:39:08
7
厉害啊，学习了
onewindy --- 2010-04-24 14:28:34
8
很不错，学习了。
夜雨 --- 2010-04-26 13:29:25
9
english?
ceteight --- 2010-04-27 16:56:19
10
UL的好像没有要求吧,3C有要求的
szyt --- 2010-04-27 22:30:37
11
完整的印字内容要在1米内体现，其它并没有规定
学习了，谢谢
Linus --- 2011-11-21 16:24:00
12
请问这些标准出自哪份标准文件？各有不同的讲法，太迷茫了，最近遇一客诉，一定要标准文件，不知哪位大侠知道，非常感谢！
qlm9988 --- 2011-11-24 22:19:36
13
标准在那里啊
cs114cs --- 2014-03-12 13:30:47
14
UL跟踪细则里有，最大1米左右
daluzou --- 2014-03-13 12:17:52
15
持續跟蹤