电线电缆网 > 国外线缆 > UL3135 22AWG 硅胶线抽样燃烧试验FT1不通过。（完整版）

UL3135 22AWG 硅胶线抽样燃烧试验FT1不通过。 - 无图版

wh2003417 --- 2009-10-19 11:27:42

1

UL3135  22AWG 硅胶线 UL抽样燃烧试验FT1不通过。
重新送样了还是不通过。UL要求写改善措施，怎么办啊？
哪位高手指点下，谢谢！

［wh2003417 在 2009-10-19 11:35:31 编辑过］

［wh2003417 在 2009-10-19 15:04:58 编辑过］

sum04 --- 2009-10-19 15:09:22

2

材料是主要问题

wh2003417 --- 2009-10-20 09:10:15

3

换了几次材料了，最后这次还是用阻燃胶生产的。
可还是没通过。
哪位知道的啊，帮帮忙！
hanma --- 2009-10-22 11:10:04

4

原因如下：1.阻燃胶燃烧等级不够.2.样品线的结构不对（产生的原因有可能是产品绝缘厚度太薄）如有不明白可与我联系.手机15918695706韩小姐

  

wh2003417 --- 2009-10-23 12:34:56

5

材料阻燃等级不够，哪位知道在哪有卖更好的硅橡胶材料？
急死了！

lwlmuzi520 --- 2009-10-23 13:26:43

6

LZ，干脆找人代做样算拉
zhengliang --- 2009-11-12 18:21:17

7

,  線經多大？？？     最好做大點。。。

UNDERWRITERS LABORATORIES, INC.                      APPLIANCE WIRING MATERIAL

Subj. 758              Section 3           Page 3135          Issued:  12-19-60

                                                            Revised:  10-16-79

 

 

Style 3135          Silicone Rubber-Insulated Wire.

_______________________________________________________________________________________________

 

Rating              200°C, 600 Volts.

_______________________________________________________________________________________________

 

*Conductor          No. 26-12 AWG solid or stranded of nickel or copper.  All

                    copper shall be tin, nickel or silver coated.  If tinned

                    copper strands are used they shall be 0.0152 inches in

                    diameter or larger, page 26.

_______________________________________________________________________________________________

 

*Insulation         Silicone Rubber, Class 22, 30 mils minimum Average,

                    27 mils minimum at any point.

_______________________________________________________________________________________________

 

Covering            None

_______________________________________________________________________________________________

 

Standard            Flexible Cord and Fixture Wire

_______________________________________________________________________________________________

 

Instructions        Same as for Type SF-2 fixture wire but omit Insulation

to UL                  Resistance Test and vertical flame test.

Representative      Spark Test, Page 30.

                    Flame Test, Page 31.

_______________________________________________________________________________________________

 

UL Counter-Check    (4) Same as for Type SF-2 fixture wire; aging shall be

Program                 conducted annually, omit vertical flame test.

                    (4) Flame Test, Page 31.

_______________________________________________________________________________________________

 

Marking             General, Page 13.

                    Temperature marker required, Pages 19, 20.

                    Items 7a, 7b, 7i, 9k.

_______________________________________________________________________________________________

 

Use                 Internal Wiring of Appliances where totally enclosed.

 

-- 结束 --